Agilent Technologies HP 8719D Service Manual page 445

Warning
personnel only. To avoid electrical shock, do not perform
Warning
The opening of covers or removal of parts is likely to
expose dangerous voltages. Disconnect the instrument from
all voltage sources while it is being opened.
Warning
Adjustments described in this document may be performed
with power supplied to the product while protective covers
are removed. Energy available at many points may, if
contacted, result in personal injury.
Warning
The power cord is connected to internal capacitors that may
remain live for 5 seconds after disconnecting the plug from
its power supply.
Warning
For continued protection against tie hazard replace line
fuse only with same type and rating (3 A 250 V F). The use
of other fuses or material is prohibited.
Compliance with German FTZ Emissions Requirements
This network analyzer complies with German FEZ 526/527 Radiated Emissions
and Conducted Emission requirements.