Suzuki LT-4WD 1990 Service Manual page 2

The SUZUKI LT-4WD was designed to offer superior performance through four stroke
power (Twin Dome Combustion Chamber engine), equipped with a three speed sub-trans­
mission gear, reverse gear, differential gear which pro vides two-wheel drive, four-wheel drive
and four-wheel drive differential lock. The suspension system consists of "double wishbone"
for front and "diagonal swing axle" for rear.
This service manual has been produced primarily for experienced mechanics whose job is to
inspect, adjust, repa ir and service 5_UZUKI vehicles. Apprentice mechanics and "do it your­
self" mechanics will also find this manual to be an extremely useful guide.
The L T-4WD, manufactured to standard specifications, is the main subject matter of this
manual. However, the L T-4WD machines distributed in your country might differ in minor
respects from the standard-specification and, if they do, it is because some minor modifica­
tions (which are of no consequence in most cases as far as servicing is r;:oncerned) had to be
made to comply with the statutory requirements of your country.
This manual contains up-to-date information at the time of its issue. Later made modifica­
tions and changes will be explained to each SUZUKI distributor in respective markets, to
whom you are kindly requested to make query about updated information, if any.
RLT LT
JR
SERVICE MANUAL
©COPYRIGHT S U Z U K I MOTOR CORPORAT!ON 1 9 90
FOREWORD
SUZUKI MOTOR CORPORATION
SERVICE
MANUAL
Overseas Service Department
SYMBOL MARK FOR COUNTRY
E -03 : F or U.S. model
E-24 : F o r Austra lia model
E -28 : F or Canada model