Table of Contents
Advertisement
Local Service Portal Operations
Setting the OCPP Parameters
NOTE
The OCPP parameter setting should be performed by an installation engineer.
To set the OCPP parameters
Tap the upper-left corner of the screen.
Tap Device Maintenance. Enter the default password (contact Autel customer
service to obtain the password).
Tap Set Parameters. Wait for the system to load the data. This can take a few
seconds.
(Optional) On the screen, tap the column of desired parameter values to modify
the data for these subjects:
Running environment: current running environment
OCPP IP: IP address of the OCPP
OCPP URL: URL of the OCPP
OCPP PORT: port number of the OCPP
MGR IP: IP address of the management platform
MGR URL: URL of the management platform
MGR PORT: port number of the operational management platform
NOTE
Make sure that you type the URL or ID correctly and without spaces.
Tap Save to save your changes.
56
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MaxiCharger DC Fast and is the answer not in the manual?
Questions and answers
How do I turn on our 120kW charger remotely, from https//uscloud.autelenergy.com/charging reality.
The Autel MaxiCharger DC Fast 120kW charger can be managed remotely using the Autel Charge Cloud. Through the cloud platform, you can access the charger status, monitor energy consumption, and manage user data. However, the specific steps for turning the charger on remotely are not provided in the available information.
This answer is automatically generated