Table of Contents
Advertisement
Unpacking
NOTE
The unpacking operation should be performed by an installation engineer.
To unpack the MaxiCharger (general procedure)
Check the tilt and inversion indicators and shock watch.
Observe the sensors attached to the wooden box for the degree of the tilt
and complete overturn. If the sensors demonstrate severe tilt (over 30°)
or total overturn as shown, refuse the delivery.
If the shock watch appears red, contact Autel customer service and the
delivery personnel, and then inspect the product for any damage. Do not
accept the delivery until the inspection is complete and no damage is
found.
Remove the packaging material and interior protection materials using
appropriate tools.
Inspect whether the MaxiCharger and the parts for installation are damaged. If
any damage is found or the parts are not consistent with the order, contact your
local dealer.
Make sure that all parts are delivered according to the order.
Figure 4-1 Tilt and Inversion Indicators
16
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MaxiCharger DC Fast and is the answer not in the manual?
Questions and answers
How do I turn on our 120kW charger remotely, from https//uscloud.autelenergy.com/charging reality.
The Autel MaxiCharger DC Fast 120kW charger can be managed remotely using the Autel Charge Cloud. Through the cloud platform, you can access the charger status, monitor energy consumption, and manage user data. However, the specific steps for turning the charger on remotely are not provided in the available information.
This answer is automatically generated