Table of Contents
Advertisement
Stop Charging
To stop charging
Tap the Stop button on the screen.
NOTE
When the battery is full, the charge session stops automatically.
Normally, you have to authorize again to finish charging, using the same
authentication method as was used to start:
QR code: Tap the Stop button on the Charging Screen of the Autel
Charge app.
RFID card: Put the RFID card on the card reader again to finish charging.
Credit card: Finish charging directly.
When charging is finished, your order details will appear.
Disconnect the EV charging cable from the EV.
Put the EV charging cable in the connector holder on the MaxiCharger.
WARNING
Hazardous voltage. Do not unplug the connector suddenly during charging. This may
cause severe damage to the MaxiCharger and/or severe personal injury or death.
Finish Charging
Return the connector to the holster on the MaxiCharger.
Figure 6-6 Order Details Screen
51
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MaxiCharger DC Fast and is the answer not in the manual?
Questions and answers
How do I turn on our 120kW charger remotely, from https//uscloud.autelenergy.com/charging reality.
The Autel MaxiCharger DC Fast 120kW charger can be managed remotely using the Autel Charge Cloud. Through the cloud platform, you can access the charger status, monitor energy consumption, and manage user data. However, the specific steps for turning the charger on remotely are not provided in the available information.
This answer is automatically generated