Front Brake Cable - Suzuki DR-Z70K8 Setup Manual

FRONT BRAKE CABLE

Pass the front brake cable through the guide.
Pass the front brake cable through the lever cover.
A: Front brake cable
B: Guide
C: Lever cover
Insert the inner cable end into the recess in the brake
lever.
Fit the outer cable into the lever holder.
Install the lever cover.
NOTE:
Before installing the cable, grease cable end.
A: Front brake cable
B: Cable end
C: Lever holder
D: Brake lever
E: Lever cover
Loosen the nut.
Pass the front brake cable through the bracket.
A: Nut
B: Bracket
C: Front brake cable
Fix the front brake cable to the bracket with the nut.
Reinstall the rubber cap.
Set the front brake cable spring to the front brake
cable.

The smaller side of the front brake cable spring
should be placed below, and the bigger, above.
A: Front brake cable
B: Nut
C: Rubber cap
D: Front brake cable spring
11