Front Brake Master Cylinder - Suzuki RM-Z250L9 Easy Set-Up Manual

FRONT BRAKE MASTER CYLINDER

Install the front brake master cylinder onto the handle-
bars.
NOTE:
DOWNWARD
• Install the holder in position according to the
mark "UP".
• Align the matching mark on the handlebars with
the master cylinder-to-holder fitting surface.
• Set the cut-line of spacer downward.
A: Holder
B: Front brake master cylinder
C: 6 × 22 mm flange bolt
D: Matching mark
E: Spacer
Tighten the front brake master cylinder mounting bolts
to the specified torque.
 Front brake master cylinder mounting bolt:
NOTE:
• First tighten the bolt A of the upper side with
specified torque and then tighten the bolt B of
the lower side.
• Make sure that the holder has no clearance at
the upper side.
A: 6 × 22 mm flange bolt
B: 6 × 22 mm flange bolt
C: Holder
D: Front brake master cylinder
E: Handlebars
11
10 N·m (1.0 kgf-m)