Ink Levels Seem To Go Down Too Quickly; A Blank Or Incorrect Page Prints; Characters On Printout Are Missing Or Unexpected - Lexmark X5470 User Manual

Ink levels seem to go down too quickly

These are possible solutions. Try one or more of the following:
A
RE YOU PRINTING PHOTOS OR DOCUMENTS WITH A LARGE NUMBER OF GRAPHICS
Because photos and graphics require more ink than text documents, ink usage increases when you print photos
or graphics.
A
RE YOU PRINTING WITH THE
To reduce ink usage, select Best only when you are printing on photo or heavyweight matte paper. All other paper
types print best at a lower Quality/Speed setting. Use the Quick Print or Normal setting to print most text
documents.

A blank or incorrect page prints

R
EMOVE THE STICKER AND TAPE FROM THE PRINT CARTRIDGES
Lift the scanner unit, and remove the print cartridges from the print cartridge carrier. Make sure the sticker and
tape are removed from the print nozzles located on the bottom of the cartridges.
M
AKE SURE THE CARTRIDGES ARE PROPERLY INSTALLED
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black or photo cartridge, make sure it is
properly installed in the left carrier.
C USB
HECK THE CONNECTION
1
Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked
by the USB symbol. Plug the long, flat end of the USB cable into this port.
2
Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.
3
Check that the USB cable is not damaged and that the
C
LOSE OTHER OPEN FILES BEFORE PRINTING
Before sending a file to print, close all other open files in the program you are using. The printer prints a blank page
when too many files are open in the same program.

Characters on printout are missing or unexpected

These are possible solutions. Try one or more of the following:
M
AKE SURE THE FONTS ARE APPLIED CORRECTLY IN THE PROGRAM
Most programs do not print a stretched or resized font.
B Q /S
EST UALITY PEED SETTING
Troubleshooting
138
?
light is on.
?