Using A Digital Phone Service; Understanding The Control Panel; Using The Control Panel - Lexmark X5470 User Manual

Using a digital phone service

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services
can be used.
•
If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface port)
on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN provider.
•
If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your DSL provider.
•
If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX. If
none exists, consider installing an analog telephone line for the fax machine. For more information on faxing
when using a PBX telephone service, see the related topic, "Setting up to fax while behind a PBX."

Understanding the control panel

Your printer may not support:
•
memory cards
•
PictBridge-enabled digital camera
•
Photo Card mode

Using the control panel

The display shows:
•
Printer status
•
Messages
•
Menus
Press
1
Copy Mode
2
3 Scan Mode
To
•
Turn the printer on and off.
•
Stop the print, copy, scan, or fax process.
Access the copy default screen and make copies.
Note: The mode is selected when the button light is on.
Access the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
Setting up the printer
37