Solving Printer Communication Problems - Lexmark X5470 User Manual

C
HECK CARTRIDGES
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the cartridges.
C
HECK PRINTER DEFAULT AND PAUSE SETTINGS
1
Click:
•
In Windows Vista:
•
In Windows XP: Start
•
In Windows 2000: Start
2
Double-click the printer queue device.
3
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
R
ECONNECT POWER SUPPLY
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press to turn the printer on.
R
EMOVING AND REINSTALLING THE SOFTWARE
Uninstall the printer software, and then reinstall it. For more information, see "Removing and reinstalling the
software" on page 132.

Solving printer communication problems

The printer and the computer cannot exchange data. You must establish bidirectional communication between the
printer and the computer. For more information, see "Bidirectional communication is not established" on
page 152.
Control Panel Printers (under Hardware and Sound).
Printers and Faxes.
Settings Printers.
Troubleshooting
131
2