Changing The Resolution / Size Of A Photo; Applying One-Click Auto Fixes To A Photo; Reducing The Red-Eye Effect In A Photo; Blurring/Sharpening A Photo - Lexmark X5470 User Manual

Changing the Resolution / Size of a photo

Resolution refers to dpi (dots per inch).
1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click Advanced.
3
Click Image Resolution / Size.
4
Select Photo Size to select from a list of defined photo sizes, or click Custom Size to enter a different photo size.
Note: If you selected Photo Size, you can click Rotate to rotate your photo 90 degrees clockwise.
5
If you selected Custom Size, enter the width and height for your custom-size photo.
Note: Maintain Aspect Ratio is selected by default. This ensures that your image will remain proportional.

Applying One-Click Auto Fixes to a photo

From the Productivity Studio Welcome Screen, click the Quick Fixes tab to access all three One-Click Auto Fixes.
1
Click File Open to select the image you want to edit.
2
With an image open, click One-Click Auto Fix to let the software automatically adjust the brightness and contrast
of your image.
3
Click Automatic Brightness to adjust only the brightness of your image.
4
Click Automatic Red-Eye Reduction to let the software automatically reduce the appearance of red-eye in your
image.
Note: Click Undo at the top of the window if you are not satisfied with the results after applying any of the One-Click
Auto Fixes.

Reducing the red-eye effect in a photo

1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click the Quick Fixes tab.
3
Click Automatic Red-Eye Reduction to let the software reduce the red-eye effect automatically. If you are not
satisfied with the results, continue with the steps below.
4
Click Manual Red-Eye Reduction.
5
Move the cursor across the photo, and place it over an affected eye.
6
Click to reduce the red-eye effect.

Blurring/Sharpening a photo

Increasing the amount of blur will soften your image. Increasing the sharpness will make your image seem more
focused.
1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click the Enhancements tab.
3
Click Blur / Sharpen.
Open to select the image you want to edit.
Open to select the image you want to edit.
Open to select the image you want to edit.
Working with photos
76