Caller Id Information Is Not Displayed; Fax Error; Fax Mode Unsupported; Remote Fax Error - Lexmark X5470 User Manual

•
Increase the fax scan resolution.
C
HECK INK
Check the ink levels, and install a new print cartridge if necessary.

Caller ID information is not displayed

C ID
ALLER PATTERN MAY NOT BE SET CORRECTLY
The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country
or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern
for the printer to display Caller ID information. For more information, see "Using Caller ID from the software" on
page 106.

Fax Error

The fax machines have stopped communicating.
Resend the fax. There may have been a problem with the quality of the telephone line connection.

Fax Mode Unsupported

The receiving fax machine does not support the type of fax you attempted to send. If it does not support:
•
Your scan resolution—lower the scan resolution.
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Quality appears.
4
Press .
5
Press or repeatedly until a lower quality appears.
6
Press .
•
Legal-size paper—reformat the document on letter-size paper.

Remote Fax Error

These are possible causes and solutions. Try one or more of the following:
C
HECK PHONE LINE
Resend the fax. There may have been a problem with the quality of the telephone line connection.
L
OWER THE TRANSMISSION SPEED
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
Troubleshooting
169