Safety Rules; Explanation Of Safety Notices; General - Fronius Robacta TC 2000 Operating Instructions Manual

Safety rules

Explanation of
safety notices
Indicates immediate danger.
▶
Indicates a potentially hazardous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.

General

The device is manufactured using state-of-the-art technology and according to
recognised safety standards. If used incorrectly or misused, however, it can
cause:
-
-
-
All persons involved in commissioning, operating, maintaining and servicing the
device must:
-
-
-
The operating instructions must always be at hand wherever the device is being
used. In addition to the operating instructions, attention must also be paid to any
generally applicable and local regulations regarding accident prevention and en-
vironmental protection.
All safety and danger notices on the device
-
-
-
-
For the location of the safety and danger notices on the device, refer to the sec-
tion headed "General" in the operating instructions for the device.
Before commissioning the device, rectify any faults that could compromise
safety.
This is for your personal safety!
DANGER!
If not avoided, death or serious injury will result.
WARNING!
If not avoided, death or serious injury may result.
CAUTION!
If not avoided, minor injury and/or damage to property may result.
injury or death to the operator or a third party,
damage to the device and other material assets belonging to the operating
company,
inefficient operation of the device.
be suitably qualified,
have sufficient knowledge of automated welding, and
read and carefully follow these operating instructions as well as the operat-
ing instructions for all system components.
must be in a legible state,
must not be damaged,
must not be removed,
must not be covered, pasted or painted over.
5