Table of Contents
Advertisement
Operator's Guide
5.0 Main Menu Selections
5.1 Power On/Off
Power button
Press and hold the Power button for 1 second to turn On
the Inspector 5000. The RJS logo will be displayed for
three seconds (on the bottom of the screen is the
firmware version), then the Grade screen will displayed.
The Inspector 5000 can be turned Off by the following
methods:
1. Press and hold the Power button for 4 seconds
2. System time out (default is sleep mode after 1
minute (screen turns off) and power down after 15
minutes)
9
003-4500
Inspector 5000™ Auto Optic
RJS, Minneapolis, MN
Advertisement
Table of Contents
Need help?
Do you have a question about the Inspector 5000 and is the answer not in the manual?