RJS Inspector 5000 Operator's Manual page 31

Operator's Guide
The next selection is 1D Aperture Override:
This selection applies ONLY when using the 2D Camera
scanner and will replace the selected Auto Optic aperture
with the value entered in this field.
Auto (based on selected Specification and bar
code size)
None (No aperture)
03 (3 mil)
06 (6 mil)
10 (10 mil)
20 (20 mil)
The next selection is 2D Aperture Override:
This selection applies ONLY when using the 2D Camera
scanner and will replace the selected Auto Optic aperture
with the value entered in this field.
Auto (based on selected Specification and bar
code size)
None (No aperture)
01 to 99 mil (1 mil intervals)
The next selection is Specifications:
This selection is for choosing the Specifications that
should be applied to bar code inspection analysis:
Standard
General Distribution
Direct Corrugate
Regulated Healthcare
Pharmacy
Non-Regulated Healthcare
Note:
This selection ONLY applies when using the 2D Camera
See Appendix F for an explanation of the options
25
003-4500
Inspector 5000™ Auto Optic
RJS, Minneapolis, MN