Exit / Save Settings - RJS Inspector 5000 Operator's Manual

Operator's Guide Inspector 5000™ Auto Optic
The Exit / Save page of the Setup screen:

Exit / Save Settings

The next selection is Restore Default:
To restore the Setup parameters back to the system
defaults, press the Select button. After pressing the
Select button, press Up Arrow button to cancel or press
Select button again to confirm the default values should
be loaded.
The next selection is Exit Without Saving:
To exit the Setup screen without saving any changes,
press the Select button. After pressing the Select button,
press Up Arrow button to cancel and return to the Setup
screen or press Select button again to exit the Setup
screen without saving the changes.
The next selection is Exit With Saving:
To exit the Setup screen and save any changes, press
the Select button. After pressing the Select button, press
Up Arrow button to cancel and return to the Setup screen
33
003-4500 RJS, Minneapolis, MN