Table of Contents
Advertisement
Inspector 5000™ Auto Optic
5.0 Main Menu Selections
5.1 Power On/Off
Power button
Press and hold the Power button for 1 second to turn On the Inspector 5000. The RJS logo will
be displayed for three seconds (on the bottom of the screen is the firmware version), then the
Grade screen will displayed.
The Inspector 5000 can be turned Off by the following methods:
1. Press and hold the Power button for 4 seconds
2. System time out (default is sleep mode after 1 minute (screen turns off) and power down
after 15 minutes)
RJS, Minneapolis, MN
Operator's Guide
002-7856
6
Advertisement
Table of Contents
Need help?
Do you have a question about the inspector 5000 and is the answer not in the manual?