Table of Contents
Advertisement
Operator's Guide
Inspector 5000™ Auto Optic
10.0 Viewing Saved Inspection Reports
The Inspector 5000 can store in memory over 1,000 bar
code inspection results.
When the Report screen is selected, the last four
inspection results will be displayed. The last inspection
result will be highlighted and will show the Date, Time,
Grade, Symbology, and Encoded data.
Example of the Report (Database) Screen:
The Up Arrow button is used to move the cursor to view
older inspection reports. The Down Arrow button will
move the cursor to newer inspection reports.
To view the Grading and Encodation information for a past
inspection result, highlight the bar code inspection report
to be viewed and press Select button. The report will be
loaded and the Grade screen will be displayed. The
Right Arrow button will display the Encode information
for the highlighted inspection report. The Profile is not
available.
59
003-4500
RJS, Minneapolis, MN
Advertisement
Table of Contents
Need help?
Do you have a question about the Inspector 5000 and is the answer not in the manual?