Auto Optic Settings - RJS Inspector 5000 Operator's Manual

Inspector 5000™ Auto Optic
The next selection is Days Between Camera
Calibration:
The maximum number of days allowable before the
system must be field calibrated (2D Camera only).
The system will display a warning message one day
before expiration and after calibration expires inspection
results may be captured but the results will not be stored
in the database and may not be printed.
The Auto Optic Settings page of the Setup screen:

Auto Optic Settings

The next selection is Aperture Size:
Two Auto Optic options are available:
3, 6, 10, and 20 mil apertures Standard
3, 5, 10, 20 mil apertures for Europe and Japan
Choose the Aperture size by pressing Left Arrow or
Right Arrow buttons:
RJS, Minneapolis, MN
Operator's Guide
003-4500
26