Field Calibration; Inspector 5000 Calibration Interval - RJS Inspector 5000 Operator's Manual

Inspector 5000™ Auto Optic Operator's Guide

5.3 Field Calibration

The Inspector 5000 requires periodic field calibration. The
interval depends on the environment where the bar code
verifier is used.

Inspector 5000 calibration interval

A clean room may be able to go two weeks between
calibrations while a dusty, high temperature, high humidity
environment may require daily calibration. Once per week
is appropriate for most facilities.
The Setup screen has a parameter "Days between
calibration" that is used to designate the required
calibration interval (default is 7).
The date of the last field calibration (and last factory re-
certification) can be viewed from the Status screen (press
and hold Print and then Power arrow), when expired the
fields will be highlighted in red.
RJS, Minneapolis, MN 003-4500
12