SUPPLY CONNECTIONS
REMOVING THE BURNER BOX GLASS
The glass front sits in a narrow channel at the bottom of the fire and is held in place by glass retainer latches
positioned at the top, either side of the unit (the 1500 model has an extra glass retainer latch in the centre).
Take care when lifting the glass from the engine noting the glass for the RHFE1500 weighs
approximately 7 kg.
IMPORTANT
Removal Procedure:
Using a screwdriver, loosen the three screws holding the louvre in place, remove the louvre, and then remove the
screws (so the glass can come out) and put the louvre to one side.
1.
Push the top glass retainer latches up and slightly to one side to release the top section of the glass. These
will stay in the upright position if moved slightly to one side
Push up the latch and to the
side to release the glass
2.
Using the frame tabs at the top of the glass frame, lift up and gently slide to the right and rotate the glass until
the left section comes free, then move the glass panel to the left to remove the right section.
Rinnai
Glass retainer latch
Louvre
14
Glass frame tabs
RHFE0800F_1000_1500 IM