NON - COMBUSTIBLE RECESS INSTALLATIONS
Front protruding panels
Flush with Frame
Any materials within this area
must be rated as non-combustible
Walls must not protrude beyond
the front boundry line
Any materials within this area
must be rated as non-combustible
Walls must not protrude beyond
the front boundry line
Rinnai
Opening size
C minimum
non-combustible
lintel if required
Opening size
C minimum
Front edge of lips
WALL LINING INSTALLATION
No combustible materials within
50mm of top of heater engine
non-combustible
lintel
No combustible materials within
50mm of top of heater engine
50
33
50
Front edge of frame
This panel must be
non-combustible
up to timber lintel level
Wallboard Support optional
in this configuration
Finishing Trim or plaster
finish appropriate for high
temperature applications
(up to 100°C) or panel
edge finish (refer flush
panel finishing solutions)
RHFE0800F_1000_1500 IM