TILED OR SECOND SKIN WALL LININGS
(combustible and non-combustible options)
Wall linings less then 20 mm may be
combustible providing the wallboard support
is installed
Adhesive or
mechanical fixing
Mechanical fixings not
recommend across the
top of the fire, adhesive
is best
With Wallboard Support removed the
wall lining must be non-combustible
for at least 300 mm up wall
Rinnai
Opening size
C minimum
Adhesive or
mechanical fixing
Opening size
25
C minimum
31
WALL LINING INSTALLATION
No combustible materials within
50mm of top of heater engine
Backing or support board
MUST be non-combustible
below timber lintel line if
Wallboard Support has been
removed
Wallboard Support optional
in this configuration
No combustible materials within
50mm of top of heater engine
Backing or support board
must be non-combustible
below timber lintel line
Wallboard Support
removed. Backing board cut
to clear lips and latches.
RHFE0800F_1000_1500 IM