Table of Contents
Advertisement
6: Basic Troubleshooting and Chassis Service
58
5. Align the PCIe card with the rear slot opening and the riser connector, then simultaneously
slide the rear bracket into place as you insert the PCIe connector into the riser.
6. Secure the rear bracket in the slot with the screw removed in step 3 and connect cables to the
add-on card as necessary. See
7. Replace the system cover and plug in the power cords prior to rebooting the server.
Figure 6-10
Low-profile PCIe Card Remove/Replace Example
Figure 6-10
for an example.
007-6465-001
Advertisement
Table of Contents
