Switching Data Display; Setting The Beam Direction - Tomey UD-800 Instruction Manual

3.7.6 Switching data display

This instrument stores waveforms for up to 100 data sets. Captured waveform data is displayed
in order every time the frame advance/retract buttons (1) is touched.

3.7.7 Setting the beam direction

Use the beam direction tabs (1) to change the position to apply the probe or the direction of the
ultrasound beam, or to display the position of a point of note (with pathological changes, etc.).
Probe set angle selection button: 9 directions
Beam direction 1: This helps indicate the angle of the meridian.
Beam direction 2: This helps to specify a notable point in an eyeball.
(Probe set angle)
)
■ 3-58
(1)
(1)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
AX, P, PE, EP, E, EA, O, CB
(Beam direction 1)
)
(Beam direction 2)
)