Table of Contents
Advertisement
measured values are displayed in the data 1 display field (2).
2)
The measurement data being stored can be selected as Data 1 or Data 2.
Touch the "Memory Data" button (3) to display a list of measurement data
stored in a USB memory. (Fig. 4) If a patient ID has not been selected,
however, the Preservation Data List screen (a list of patient IDs stored in a
USB memory) opens. Refer to "3.8.3 Saved data management."
(Fig. 4)
)
3)
Touch the "Data Display" button (4) to display the selected measurement
data in the subtraction display screen.
4)
When measurement data are selected in Data 1 and Data 2, the difference
value between Data 1 and Data 2 is displayed in the difference display field
(5). If measurement points have been selected, however, only the difference
values of the memory numbers whose measurement points match in both
data are displayed.
5)
When the "Data 1 - Data 2" button (6) is touched, the indication on the button
will change to "Data 2 - Data 1," and the difference value of Data 2 - Data 1
will be displayed.
(4)
(6)
(5)
3-55
■
Hide quick links:
Advertisement
Table of Contents
