Table of Contents
Advertisement
3.2 B mode image diagnosis
Refer to "3.1.3 Switching modes" for how to enter B mode image diagnosis.
The instrument automatically detects the connected probe.
3.2.1 Settings related to measurement
a) Acoustic velocity during measurement
Set the acoustic velocity used during measurement by the measurement function.
b) Settings for items displayed in image
Selects the items to be displayed in the image monitor.
Patient ID / Patient's eye / Measurement date/time / Comment / Focus marker (40
MHz only)
3.2.2 Displaying probe angle
1) Touch the "Probe Icon" button (1) or the probe icon shown on the image to open the
■
3-10
■
When the probe is changed, all unsaved data captured by the previous
probe is deleted. Be very careful when performing initialization.
Touch the "Setup" button (1) to display the Setup (Ultrasound Pachy) screen (Fig.
2). Touch the "Exit" button (2) after settings are completed to apply the selected
contents and return to the measurement screen (Fig. 1).
(1)
(Fig. 1)
Indicates the angle that the probe was set against the eye.
■
Confirm that the displayed probe angle matches the probe angle
captured in the picture.
probe angle selection screen. The selected angle is shown in the lower right of
the monitor. "N" means nasal (nose) and "T" means temporal (ear).
(2)
(Fig. 2)
Hide quick links:
Advertisement
Table of Contents
