Tomey UD-800 Instruction Manual page 109

● Image Quality Setting
Open the Image Quality setting screen and set preset values of each gain and dynamic range.
Select Standard, High Contrast or Wide Dynamic Range (1). The corresponding control tools
appear on the right. Touch the "Apply Current Setting" button (2) to apply the setting values
shown on the current screen for each box. Touch the "Default" button to return to the default
settings.
(1)
b) Measurement Selection: B-Mode 40MHz
Touch the "B-Mode 40MHz" button (1) to make settings for 40MHz
Settings are the same as for "Measurement Setting B-Mode 10_10MH."
c) Measurement Setting: Axial
Touch the "Axial" button (1) to make settings for "Axial."
(2)
(3)
(1)
(1)
3-77 ■