2
TECHNICAL DATA
2.1
Operating and storage conditions
Ambient operating temperature range
Ambient storage temperature range
Maximum ambient operating humidity
Maximum operating altitude
Maximum inlet gas temperature
2.2
Mechanical data
Dimensions
Mass
Process and sealing liquid connections
Ingress Protection (IP) rating
Maximum flatness deviation for mounting *
EHR 2102S/C/D, 2170S/C/D
EHR 2190S/C/D, 2290S/C/D, 2390S/C/D
SHR 1300S/C/D, 2300S/C/D, 1400S/C/D, 2400S/C/D
SHR 1750S/C/D, 2750S/C/D, 1950S/C/D, 2950S/C/D
SHR 21200S/C/D, 11500S/C/D, 21500S/C/D, 11850S/C/D,
21850S/C/D
SHR 12500S/C/D, 22500S/C/D
* Refer to
Section
3.7.
2.3
Performance
Note:
The performance data specified in Tables
Additional performance data may be supplied in your System Manual if you have specifically ordered your
pump for use with a different sealing liquid.
Note:
The "Maximum sealing liquid flow rate" data specified in Tables
flows into the sealing liquid ring on pumps without a closed-loop seals configuration. Refer to your System
Manual for the specific details of your pump system.
Maximum inlet capacity
Maximum outlet pressure
Shaft power
© Edwards Limited 2012. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Table 3 - Operating and storage conditions
Table 4 - Mechanical data
5
to
7
applies to pumps used with water as the sealing liquid.
Table 5 - Performance Data
See Tables
1.1 bar absolute, 1.1 x 10
See Tables
A750-04-880 Issue F
o
-20 to 40
C
o
-30 to 50
C
90%
1000 m
o
70
C
Refer to your System Manual
Refer to your System Manual
Refer to your System Manual
IP54
-1
0.1 mm m
-1
0.1 mm m
-1
0.1 mm m
-1
0.1 mm m
-1
0.2 mm m
0.4 mm m
-1
6
and
7
may include seals flush liquid which
6
and
7
5
Pa
6
and
7
Page 7