Table of Contents
Advertisement
8.3
REPACKING IN A DIFFERENT CARTON
If the original carton is not available, use the following procedure to pack the
NPB-195:
1.
Place the monitor in a plastic bag.
2.
Locate a corrugated cardboard shipping carton with at least 200 pounds per
square inch (psi) bursting strength.
3.
Fill the bottom of the carton with at least 2 inches of packing material.
4.
Place the bagged unit on the layer of packing material and fill the box
completely with packing material.
5.
Seal the carton with packing tape.
6.
Label the carton with the shipping address, return address, and RGA
number, if applicable.
Section 8: Packing for Shipment
8-3
Advertisement
Table of Contents
Troubleshooting
