Section 7: Packing For Shipment; General Instructions; Repacking In Original Carton; Repacking In A Different Carton - Mallinckrodt Nellcor N-20PA Service Manual

SECTION 7: PACKING FOR SHIPMENT

7.1

GENERAL INSTRUCTIONS

7.2

REPACKING IN ORIGINAL CARTON

7.3

REPACKING IN A DIFFERENT CARTON

7.1 General Instructions
7.2 Repacking in Original Carton
7.3 Repacking in a Different Carton
Should you need to ship the N-20PA monitor for any reason, follow the
instructions in this section.
Pack the monitor carefully. Failure to follow the instructions in this section may
result in loss or damage not covered by the Mallinckrodt warranty. If the
original shipping carton is not available, use another suitable carton or call
Mallinckrodt Technical Services to obtain a shipping carton.
Prior to shipping the device, contact Mallinckrodt Technical Services for a
returned goods authorization (RGA) number. Mark the shipping carton and any
shipping forms with the RGA number.
If available, use the original carton and packing materials. Pack the monitor as
follows:
1. Place the monitor and, if necessary, accessory items in original packaging.
2. Place in shipping carton and seal carton with packaging tape.
3. Label carton with shipping address, return address, and RGA number.
If the original carton is not available:
1. Place the monitor in plastic bag.
2. Locate a corrugated cardboard shipping carton with at least 200 pounds per
square inch (psi) bursting strength.
3. Fill the bottom of the carton with at least two inches of packing material.
4. Place the bagged unit on the layer of packing material and fill the box
completely with packing material.
5. Seal the carton with packing tape.
6. Label carton with shipping address, return address, and RGA number.
7-1