Factory Default Settings; Performance; Table 9-1: Default Settings - Mallinckrodt NELLCOR NPB-195 Service Manual

9.6

FACTORY DEFAULT SETTINGS

9.7

PERFORMANCE

9.7.1 Measurement Range
1
9.7.2 Accuracy
9.7.2.1
SpO
2
9.7.2.2 Pulse Rate (optically derived)
Parameter
SpO High
2
SpO Low
2
Pulse Rate High
Pulse Rate Low
Alarm Volume
Alarm Silence Duration
Alarm Silence Restriction
Pulse Beep Volume
Baud Rate
Display
Trend
Contrast
Language
SpO :
2
Pulse/Heart Rate:
Adult:
Neonatal:
2
20–250 bpm ± 3 bpm
1
Accuracies are expressed as plus or minus "X" digits (saturation percentage points) between
saturations of 70-100%. This variation equals plus or minus one standard deviation (1 SD), which
encompasses 68% of the population. All accuracy specifications are based on testing the subject
monitor on healthy adult volunteers in induced hypoxia studies across the specified range. Adult
accuracy is determined with Oxisensor II D-25 sensors. Neonatal accuracy is determined with
Oxisensor II N-25 sensors.
2
Accuracies are expressed as plus or minus "X" bpm across the display range. This variation
equals plus or minus 1 Standard Deviation, which encompasses 68% of the population.

Table 9-1: Default Settings

100%
85%
170 bpm
40 bpm
Level 5
60 seconds
Off with reminder
Level 4
9600
Pleth
Saturation
Mid-range
English
0–100%
30–250 bpm
70–100% ± 2 digits
0–69% unspecified
70–100% ± 3 digits
0–69% unspecified
Section 9: Specifications
Default Value
9-3