Evm Graphical User Interface (Gui) Software Installation; Figure 5-2. Ads131B26-Q1 Software Installation; Table 5-2. Nominal Voltages: Default Configuration - Texas Instruments ADS131B26Q1EVM-PDK User Manual

ADS131B26Q1EVM-PDK Initial Setup
Table 5-2 lists the nominal voltages that result from the default configuration.
Supply Name
ISO_VCC
ISO_3V3
VADC_HV
Voltages are measured with respect to the local ground on the same side of the isolation barrier.

5.2 EVM Graphical User Interface (GUI) Software Installation

Download the latest version of the EVM GUI installer from the Tools and Software folder of the
ADS131B26Q1EVM-PDK and run the GUI installer to install the EVM GUI software on your computer.
Manually disable any antivirus software running on the computer before downloading the EVM GUI
installer onto the local hard disk. Depending on the antivirus settings, an error message may appear
the executable file may be deleted.
Accept the license agreements and follow the on-screen instructions shown in
installation.
14 ADS131B26Q1EVM-PDK Evaluation Module

Table 5-2. Nominal Voltages: Default Configuration

APWR
DPWR
AVDD
DVDD
RCAPA
RCAPB
Figure 5-2. ADS131B26-Q1 Software Installation Prompt
Copyright © 2022 Texas Instruments Incorporated
Note
CAUTION
Voltage
3.3 V
3.3 V
5.1 V
5.1 V
5.1 V
3.3 V
3.3 V
1.25 V
1.25 V
Figure 5-2 to complete the
SBAU413 – OCTOBER 2022
Submit Document Feedback
www.ti.com