Table of Contents
Advertisement
ADS8332EVMV2-PDK Initial Setup
5.2 EVM Graphical User Interface (GUI) Software Installation
The following steps list the directions to install the software.
Manually disable any antivirus software running on the computer before downloading the EVM GUI
installer onto the local hard disk. Otherwise, depending on the antivirus settings, an error message
may appear or the installer.exe file may be deleted.
Download the latest version of the EVM GUI installer from the Tools and Software folder of the
ADS8332EVMV2-PDK, and run the GUI installer to install the EVM GUI software. Administrator privileges on the
PC are required in order to install the EVM software. Accept the license agreements and follow the on-screen
instructions shown in
Figure 5-2
10
ADS8332EVMV2-PDK Evaluation Module
CAUTION
in order to complete the installation.
Figure 5-2. Software Installation Prompts
Copyright © 2023 Texas Instruments Incorporated
SBAU251B – JULY 2017 – REVISED FEBRUARY 2023
Submit Document Feedback
www.ti.com
Advertisement
Table of Contents
