Evm Graphical User Interface (Gui) Software Installation; Figure 7-2. Ads1285 Software Installation Prompt; Table 7-2. Nominal Voltages Resulting From A Default - Texas Instruments ADS1285EVM-PDK User Manual

ADS1285EVM-PDK Initial Setup
Table 7-2 lists the nominal voltages that result from the default configuration.
Table 7-2. Nominal Voltages Resulting From a Default Configuration
Supply Name
AVSS+5V
DVDD (IOVDD)

7.2 EVM Graphical User Interface (GUI) Software Installation

Download the latest version of the EVM GUI installer from the Tools and Software folder of the ADS1285EVM-
PDK and run the GUI installer to install the EVM GUI software on your computer.
Manually disable any antivirus software running on the computer before downloading the EVM GUI
installer onto the local hard disk. Depending on the antivirus settings, an error message may appear
or the installer. The .exe file can be deleted.
Accept the license agreements and follow the on-screen instructions shown in
installation.
14 ADS1285EVM-PDK Evaluation Module
AVSS
AVDD1
AVDD2
5.5V
REFP
–2.5V

Figure 7-2. ADS1285 Software Installation Prompt

Copyright © 2022 Texas Instruments Incorporated
Voltage (Referenced to GND)
NA, external supply needed to generate –2.5 V
CAUTION
SBAU394A – APRIL 2022 – REVISED SEPTEMBER 2022
GND (0 V)
5 V
3.3 V
5 V
5 V
5.5 V
4.096 V
Figure 7-2 to complete the
Submit Document Feedback
www.ti.com