Table 3.2 Command Letters And Suffix For Ith - Newport i Series Operator's Manual

The following table are the exceptions to the Serial Communication Manual's Table 5.3

Table 3.2 Command Letters and Suffix for iTH

Command Command
Index
X 01
X 02
X 03
ENTER COMMUNICATION OPTION MENU:
Press a
Press d
Press a
Press d
COMMUNICATION PARAMETERS SUBMENU:
Allows the user to adjust Serial Communications Settings of the instrument.
When connecting an instrument to a computer or other device, the
Communications Parameters must match. Generally the default settings
(as shown in Section 5) should be utilized.
Press d
BAUD SUBMENU:
Press d
Press b
Press d
PARITY SUBMENU:
Press d
Press b
Press d
DATA BIT SUBMENU:
Press d
Press b
Press d
Function
Send RH Reading
Send Temperature Reading
Send Dewpoint Reading
1) Press a , if necessary, until CNFG prompt appears.
2) Display advances to RDG Reading Configuration Menu.
3) Press a , if necessary, until Display advances to COMM
Communication Options Menu.
4) Display advances to C.PAR Communication Parameters
Submenu.
If Communication Option is not installed, the display shows NONE
and skips to the Color Display Menu.
5) Display advances to BAUD Baud Submenu.
6) Display flashes previous selection for BAUD value.
7) Scroll through the available selections: 300_ , 600_ , 1200 ,
2400 , 4800 , 9600 , 19.2K .
8) Display shows STRD stored message momentarily and then
advances to PRTY only, if it was changed, otherwise press a to
advance to PRTY Parity Submenu.
9) Display flashes previous selection for "Parity".
10) Scroll through the available selections: NO, ODD, EVEN.
11) Display shows STRD stored message momentarily and then
advances to DATA only, if it was changed, otherwise press a to
advance to DATA Data Bit Submenu.
12) Display flashes previous selection for "Data Bit".
13) Scroll through the available selections: 7-BIT, 8-BIT.
14) Display shows STRD stored message and then advances to
STOP only, if it was changed, otherwise press a to advance to
STOP Stop Bit Submenu.
Command
Bytes
0
0
0
41
# Of Default
Characters Value
0 -
0 -
0 -