Header Pan; Removing Header Pan - MacDon R85 Operator's Manual

4.12 Header Pan

The header pan is located behind the cutterbar and helps prevent material loss and wrapping in certain crops, such
as grass seed, oats, and tall stalky crops.
In conditions where more soil and stones are being picked up by the cutterbar, it may be desirable to remove the
pan to allow the debris to fall out before being fed into the conditioner.

4.12.1 Removing Header Pan

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Raise the header fully.
2. Stop the engine and remove the key.
3. Engage header safety props.
Engaging/Disengaging the Header Safety Props, page
26.
4. Open the cutterbar doors.
Doors, page 30.
5. Remove six bolts (A) securing pan (B) to header and
remove pan.
147757
OPERATING THE HEADER
Refer to
3.3
Refer to
3.5 Cutterbar
92
Figure 4.23: Underside of Header
Revision B