Detaching The Header: M150, M155, Or M155E4 Windrowers - MacDon R85 Operator's Manual

15. Move the windrower platform (A) back to the
CLOSED position.
16. Refer to the windrower operator's manual to
mechanically detach header from the windrower.

3.8.3 Detaching the Header: M150, M155, or M155E4 Windrowers

Refer to your windrower operator's manual for the procedure to mechanically detach the header from a windrower.
Refer to the following procedure to disconnect electrical and hydraulic systems.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Lower the header to the ground. If the ground is soft, place blocks under the header.
2. Stop the engine and remove the key.
147757
OPERATION
Figure 3.79: Windrower LH Platform
65
Revision B