Attaching The Header; Attaching The Forming Shield - MacDon R85 Operator's Manual

3.7 Attaching the Header

3.7.1 Attaching the Forming Shield

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Stop the engine and remove the key.
2. Remove the two clevis pins (A) from forming shield
forward end.
3. Position the forming
windrower frame.
147757
OPERATION
shield (A) under the
Figure 3.20: Forming Shield
Figure 3.21: Forming Shield under Windrower
37
Revision B