Opening The Driveshield: Export Headers; Closing The Driveshield: Export Headers - MacDon R85 Operator's Manual
Rotary disc 13-foot header for self-propelled windrower
Hide thumbs
Also See for R85:
- Operator's manual (220 pages) ,
- Assembly instructions manual (122 pages) ,
- Unloading and assembly instructions (55 pages)
Table of Contents
Advertisement
3.4.3 Opening the Driveshield: Export Headers
Follow these steps to open the driveshield on export headers:
1. Release rubber latch (A).
2. Insert a screwdriver (or equivalent) through hole (B)
in driveshield and into the notch in latch (C) and
disengage latch.
3. Open driveshield (D).
3.4.4 Closing the Driveshield: Export Headers
Follow these steps to close the driveshield on export headers:
1. Lower driveshield (A), so that at lower end of
driveshield engage holes in the lower panel and
latch (B) re-engages shield.
2. Engage rubber latch (C).
147757
OPERATION
Figure 3.7: Driveshield
Figure 3.8: Driveshield
29
Revision B
Advertisement
Table of Contents
