Table of Contents
Advertisement
miniLAB 1008 User's Guide
To perform the scan test, do the following:
1. Click on the
default settings.
2. Click on the
shown configured with its default settings.
3.
Select the channel(s) to scan, range, rate that you want to perform the scan test on
and click
4.
Connect an external signal to each channel to be scanned, press the
and verify the waveform(s) displayed in the plot area.
In the following example, a square wave is input to channel 0, and a sine wave is
input to channel 1.
tab. The following dialog is shown configured with its
Scan Test
button. The
Scan Options
.
OK
Calibrating and Testing the Device
Scan Options
5-8
dialog opens. This dialog is
button,
Start
Advertisement
Table of Contents
Need help?
Do you have a question about the miniLAB 1008 and is the answer not in the manual?
Questions and answers