Getting Started With Tracerdaq; Launching Tracerdaq From Instacal - Measurement Computing miniLAB 1008 User Manual

Usb device for analog and digital i/o

Hide thumbs Also See for miniLAB 1008:

Table of Contents

Getting Started with TracerDAQ

TracerDAQ is a set of virtual instruments that you can use to acquire and display analog

data from the miniLAB 1008.

This chapter details how you acquire data from the miniLAB 1008, and plot the data on

the TracerDAQ strip chart. The following exercise helps get you started with the

TracerDAQ strip chart by showing you how to:

Launch TracerDAQ from InstaCal

Select the hardware and channels to use as your data source

Log the data to a file

Plot the data on TracerDAQ's strip chart

Measurement Computing's InstaCal program shares configuration information with

TracerDAQ. To start TracerDAQ from InstaCal, follow these steps.

1. Click on Start >

InstaCal application.

The InstaCal main form opens.

Programs

Measurement Computing

3-1

Chapter 3

to launch the

InstaCal

Table of Contents

Do you have a question about the miniLAB 1008 and is the answer not in the manual?