Configuring Channel 3 - Measurement Computing miniLAB 1008 User Manual

miniLAB 1008 User's Guide
2. In the
legend.
3. In the
control arrows to select the number.
4. From the

Configuring channel 3

To configure the miniLAB 1008's channel 3 as part of the data source to acquire and
plot, follow the steps below.
1. Click to select the second
2. In the
3. In the
text box, enter
Name
number entry box, enter
Board Channel
list box, select
Range
list box, click the down arrow and select the miniLAB 1008.
Board
text box enter
Name
. The name you enter shows on the strip chart's
CH0
.
BIP10Volts
check box.
Enabled
. This name also shows on the strip chart's legend.
CH3
3-4
Getting Started with TracerDAQ
, or click the numeric up/down
0