Installing Instacal, Tracerdaq, And The Universal Library - Measurement Computing miniLAB 1008 User Manual

miniLAB 1008 User's Guide
If the auto-run feature is not enabled on your computer, use Explorer to navigate
to the root of the CD drive, and double-click on the
Measurement Computing CD
Follow the procedures below to install one or more of the software packages
available from this dialog.

Installing InstaCal, TracerDAQ, and the Universal Library

InstaCal and the Universal Library are required to run the Universal Library for
LabVIEW, MCC DAQ Components for .NET and MCC DAQ Controls for VB6.
To install InstaCal, TracerDAQ, and the Universal Library, follow the procedure below.
1. Click on the
A
Welcome
2. Click on the
An
Installation Options
3. Make sure the
boxes are selected, and click on the
dialog opens.
InstaCal, TracerDAQ, and Universal Library
dialog opens.
button.
Next
dialog opens.
Windows Universal Library and InstaCal
button.
Next
2-6
Installing the miniLAB 1008
program. The
button.
and check
TracerDAQ