Measurement Computing miniLAB 1008 User Manual page 32

miniLAB 1008 User's Guide
2. From the
3. Select
The first time you launch TracerDAQ, the strip chart's
opens by default. Each successive time you launch TracerDAQ, the
Setup
application you last ran.
TracerDAQ's virtual instruments are accessed from the View menu
You can launch each virtual instrument from TracerDAQ's pull-down
When TracerDAQ is launched from InstaCal, the
plot shows the name of the miniLAB 1008 that you selected in InstaCal.
, select the
PC Board List
from the
TracerDAQ
dialog for either the strip chart or scope opens, depending on which
miniLAB 1008
menu to launch TracerDAQ.
Applications
3-2
Getting Started with TracerDAQ
item.
Data Source Setup
Data Source
View
drop-down list for the first
Board
dialog
menu.