Installing Universal Library For Labview - Measurement Computing miniLAB 1008 User Manual

miniLAB 1008 User's Guide
TracerDAQ requires the .NET Framework
If your PC doesn't have the .NET Framework installed, the
not be selected. The following dialog opens if the .NET Framework is not installed and
you click in the checkbox to override the default (unchecked) setting of the TracerDAQ
checkbox.
Click to continue the installation. Before running TracerDAQ, use your browser to
OK
download and install the .NET Framework from the web address specified on the dialog.
4. If you are not installing any other software on the CD, restart your computer.
If you want to install other software, you can wait to reboot the computer until after
that software is installed.

Installing Universal Library for LabVIEW

You must install InstaCal before you install the Universal Library for LabVIEW. Refer
to "Installing InstaCal, TracerDAQ, and the Universal
The Universal Library for LabVIEW installation program also checks to see if
LabVIEW is installed on your computer. If a licensed copy of LabVIEW is not installed,
the Universal Library for LabVIEW installation program exits.
To install UL for LabVIEW, follow the procedure below.
1. Click on the
A
Welcome
2. Click on the
Universal Library for LabVIEW
dialog opens.
button, and follow the installation instructions as prompted.
Next
Library" on page 2-6.
button.
2-7
Installing the miniLAB 1008
checkbox may
TracerDAQ