Measurement Computing miniLAB 1008 User Manual page 28

miniLAB 1008 User's Guide
The serial number shown in the dialog is a custom number automatically assigned
by InstaCal when you install the miniLAB 1008.
If InstaCal does not detect the miniLAB 1008
If the Plug and Play Board Detection dialog does not display, go to
1008 is not detected by
2. Leave the check box next to the miniLAB 1008 item checked, and click
The dialog closes, and the miniLAB 1008 is added to the
InstaCal
If the miniLAB 1008 is not detected by InstaCal
If the
option on the
and that you are running a supported operating system (Microsoft® Windows® 98
nd
(2 edition), Windows ME, Windows 2000, or Window XP). Then, run InstaCal
again.
If your USB connection is good, and you are running a supported operating system,
but InstaCal still does not detect the miniLAB 1008, notify Measurement
Computing Corporation by phone, fax, or email:
Phone: 508-946-5100 and follow the instructions for reaching Technical
o
Support.
Fax: 508-946-9500 to the attention of Technical Support
o
Email:
o
InstaCal" on page 2-10.
main form.
Plug and Play Board Detection
menu). Make sure that you connected the USB cable properly,
File
techsupport@measurementcomputing.com
dialog does not appear, exit InstaCal (
2-10
Installing the miniLAB 1008
"If the miniLAB
.
OK
on the
PC Board List
Exit