Installing Softwire Graphical Programming; Installing Softwire Mcc Daq Components Or Controls - Measurement Computing miniLAB 1008 User Manual

miniLAB 1008 User's Guide

Installing SoftWIRE Graphical Programming

SoftWIRE 4.2 for Visual Studio .NET is required to use MCC DAQ Components for
.NET. You must install Visual Studio .NET before you install SoftWIRE for Visual
Studio .NET.
If you are interested in exploring graphical programming, but do not own a copy of
Visual Studio, you can purchase a copy of Visual Basic .NET for under $99. To learn
where, and to learn more about SoftWIRE Graphical Programming, call our Technical
Sales Engineers at 508-946-5100 x2.
SoftWIRE 3.1 for Visual Basic® 6.0 is required to use MCC DAQ Controls for VB6.
You must install Visual Basic 6.0 before you install SoftWIRE 3.1 for Visual Basic 6.
To install SoftWIRE 4.2 for VS .NET or SoftWIRE 3.1 for VB6, follow the procedure
below.
1. Click on the
2. Click to select the SoftWIRE version to install, and then click on the
3. Follow the installation instructions as prompted.

Installing SoftWIRE MCC DAQ Components or Controls

You must install SoftWIRE for Visual Studio .NET before you install SoftWIRE MCC
DAQ Components for .NET. You must install SoftWIRE 3.1 for Visual Basic 6.0 before
you install SoftWIRE MCC DAQ Controls for VB 6. Refer to
Graphical
You must install the Universal Library before you install either SoftWIRE MCC DAQ
Components for .NET or SoftWIRE MCC DAQ Controls for VB6. Refer to "Installing
InstaCal, TracerDAQ, and the Universal Library" on page 2-6 for instructions.
button. A
SoftWIRE
Programming" on page 2-8 for instructions.
SoftWIRE Installation
2-8
Installing the miniLAB 1008
dialog opens.
button.
Install
"Installing SoftWIRE