SMA SUNNY ISLAND 4.4M Operating Manual page 29

SMA Solar Technology AG
90° ... ≥75°
0°
Figure 4: Permitted and prohibited mounting positions
Dimensions for mounting:
Figure 5: Position of the anchoring points(Dimensions in mm)
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you will prevent power
reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple products are mounted in areas with high ambient temperatures, increase the clearances between the
products and ensure sufficient fresh-air supply.
Operating manual
217.3
20
79.2
104.6
87.3 130
58.3 25 134
217.3
11
Ø 11
110
130 87.3
Ø 9
134 25 58.3
SI44M-80H-13-BE-en-15
5 Mounting
29