SMA SUNNY ISLAND 4.4M Operating Manual page 108

8 Operation
Log in as Installer or User for the First Time
Password assignment for user and installer
The passwords for the user groups Installer and User must be assigned when accessing the user interface for the
first time. If the inverter was registered in a communication device (e.g., SMA Data Manager) and the system
password was assigned, the system password is also the installer password. In this case, only the user password
must be assigned.
• If you as a specialist assign the user password, only pass the password on to persons to access the inverter
data via the user interface.
• If you as a user assign the installer password, only pass the password on to persons to receive access to the
system.
Installer password for inverters registered in a communication device or in Sunny Portal
To be able to register the inverter in a communication device (e.g., SMA Data Manager) or in a Sunny Portal
system, the password for the user group Installer must match the system password. If you assign a password for
the user group Installer via the user interface of the inverter, the same password must also be used as the system
password.
• Assign a uniform installer password to all SMA devices in the system.
Procedure:
1. In the drop-down list Language, select the desired language.
2. In the Password field, enter a password for the User user group.
3. In the Repeat password field, enter the password again.
4. Click on Save.
5. In the New password field, enter a password for the Installer user group. Assign a uniform password to all
SMA devices to be registered in a system. The installer password is also the system password.
6. In the Repeat password field, enter the password again.
7. Click on Save and log in.
☑ The installation assistant or the home page of the user interface opens.
Log in as the User or Installer
1. In the drop-down list Language, select the desired language.
2. In the User group drop-down list, select the entry Installer or User.
3. Enter the password in the field Password.
4. Select Login.
☑ The start page of the user interface opens.
Log Out as the User or Installer
1. On the right-hand side of the menu bar, select the menu User Settings.
2. In the subsequent context menu, select [Logout].
☑ The login page of the user interface opens. The logout was successful.
108 SI44M-80H-13-BE-en-15
SMA Solar Technology AG
Operating manual